Valve Zone; Base Plates - Aventics DeviceNet Description Du Système Et Notice D'emploi

27
26
Fig. 7: Example configuration: unit consisting of AES series bus coupler and I/O modules, and AV series valves
AVENTICS | Bus Coupler AES/Valve Driver AV, DeviceNet | R412018138–BAL–001–AC
30
29
28
34
26 Left end plate
27 I/O modules
28 Bus coupler
29 Transition plate
30 Pneumatic supply plate

12.2 Valve zone

The following figures show the components as illustrations and symbols. The symbol
representations are used in "12.5 Conversion of the valve zone" on page 116.
12.2.1

Base plates

The valves from the AV series are always mounted on base plates that are assembled into blocks
so that the supply pressure is applied to all valves.
The base plates are always 2x or 3x base plates for two or three single or double solenoid valves.
31
31 Valve driver (concealed)
32 Right end plate
33 Pneumatic unit, AV series
34 Electrical unit, AES series
107
Conversion of the Valve System
32
33