Hayward DV4000 Mode D'emploi page 3

Congratulations on your purchase of your automatic suction pool cleaning system from Hayward.
Your Cleaner is the smart, efficient way to clean your pool. Hayward Disc Cleaners are powered
by your pool's filter system and are designed to work well with most systems. Therefore the
performance of the Cleaner in your pool will be relative to that power source. Because the
operation and performance of the Cleaner are system reliant, there is a remote possibility that a
"service call" may be necessary to complete the proper installation of your Cleaner. Because this
is an installation related call, it will be at the consumer's expense. Also, one or more of the
accessories designed for the Cleaner, including additional hose sections (if needed), might be
applicable to your installation. Consult your Hayward dealer for the price and availability. For
Technical Assistance, call Hayward at 908-355-7995 (USA only).
TO REGISTER YOUR CLEANER IN OUR DATABASE, GO TO:
For Your Records
Record the following information for your convenience:
1) Purchase Date _______________________________________________________________
2) Serial Number _______________________________________________________________
Note
Hayward Disc Cleaners should not be used to clean the pool for spring start-up. On those
occasions, where your pool is subjected to an abnormal debris load, maintenance steps should
be taken to return the pool to "pre-installations" condition.
Page 3 of 12
Disc Suction Cleaner
OWNER'S MANUAL
www.haywardnet.com
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
DV4000 Rev. A