Installation Guide - Carbest 47348 Manuel D'utilisation

ENGLISH 47348

INSTALLATION GUIDE

Camera Connection:
● Locate the clearance lights wiring on your vehicle. You may need to remove the
interior panel in order to locate. Connect the power cables for camera: Red wire to
lights positive; Black wire to chassis ground.
Monitor Connection:
● Firmly insert the lighter plug to cigarette lighter socket. Do not install the monitor
where it may obstruct driver's view or obstruct and air bag device.
Cleaning
● If dirt,rain or snow attaches to the camera,
the monitor may not clearly display objects.
● Do not use alcohol, benzene or thinner to clean the camera. This will cause
discoloration. To clean the camera, wipe with a clean cloth dampened with mild
cleaner diluted with water and then wipe with a dry cloth.
26