Removing The Lithium-Ion (Li-Ion); Installing The Lithium-Ion (Li-Ion) Battery - Motorola RDX Série Guide D'utilisation

recycling options for consumers, businesses,
and governmental agencies.

Installing the Lithium-Ion (Li-Ion) Battery

1. Turn OFF the radio.
2. With the Motorola Solutions logo side up on the
battery pack, fit the tabs at the bottom of the
battery into the slots at the bottom of the radio's
body.
3. Press the top part of the battery towards the
radio until a click is heard.
Note:
Removing the Lithium-Ion (Li-Ion) Battery
Battery
Latch
Slots
1. Turn OFF the radio.
2. Push down the battery latch and hold it while
removing the battery.
3. Pull the battery away from the radio.
To learn about the Li-Ion Battery Life
features, refer to "About the Li-Ion Battery"
on page 15
Battery Latch
17
English