Panasonic DC-GH6 Manuel D'utilisation page 36

Materials – Troubleshooting
The brightness or coloring of the recorded image is different from the
actual scene.
When recording under lighting such as fluorescent or LED lighting, increasing the
0
shutter speed may introduce slight changes to brightness or coloring.
These are a result of the characteristics of the light source and do not indicate a
malfunction.
When recording subjects in extremely bright locations or recording under lighting
0
such as fluorescent, LED, mercury, or sodium lighting, the coloring or screen
brightness may change or horizontal striping may appear on the screen.
The flash does not fire.
The flash does not fire when using the following functions:
0
– Video recording
– [ELEC.]/[Silent Mode]
– High Resolution mode
– [Filter Settings]
[ ] is displayed on the screen.
The fan has stopped. Turn off and on the camera. If the fan does not work after
0
turning the camera off and then on again, consult the dealer.
The temperature of the camera will rise if you continue to use the camera with the
0
fan stopped. Do not use over long periods of time.
An alarm sounds when the card door is opened.
An alarm may sound when a door is opened while writing to a card. Wait until writing
0
finishes, then turn the camera off and remove the card.
When the camera is shaken, a rattling sound is heard from the
camera.
The sound is caused by the in-body stabilizer. This is not a malfunction.
0
There is rattling noise from the lens when the camera is turned on or
off, or when the camera is swung.
There is a sound from the lens when recording.
This is the sound of the lens moving and aperture operation. It is not a malfunction.
0
36
DVQX2175 (ENG)