Panasonic DC-GH6 Manuel D'utilisation page 35

Recording stops before finishing.
Cannot record.
Cannot use some functions.
The temperature of the camera or card rises more readily in the following
0
circumstances: when the ambient temperature is high; and during continuous use
such as when recording high-definition video, taking burst pictures at high speed, or
outputting via HDMI.
When the temperature of the camera or card rises, [
screen. If you continue to use the camera, a message indicating that the camera or
card cannot be used is displayed on the screen and recording and HDMI output will
be stopped. Wait for the camera or card to cool down and for the message indicating
that they can be used again. When the message indicating that they can be used
again is displayed, turn the camera off then on again.
* When recording with the camera mounted on a tripod, etc., you can set the
temperature at which recording is stopped to a higher temperature. Refer to the
"Operating Instructions <Complete Guide>" for details.
The recorded image looks rough.
Noise appears on the picture.
When the camera is used continuously, the temperature inside the camera may rise
0
and this may cause lower image quality. We recommend turning off the camera
whenever you are not actually recording.
Striping or flicker may appear under lighting such as fluorescent or
LED lighting.
This is characteristic of MOS sensors which serve as the camera's pickup sensors.
0
This is not a malfunction.
When using the electronic shutter, lowering the shutter speed may reduce the effect
0
of the horizontal stripes.
0 If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)], or fix the shutter speed with the [
Materials – Troubleshooting
] appears blinking on the
] mode.
DVQX2175 (ENG)
35