How To Use The Appliance; Practical Advice - Fagor BV-2006X Mode D'emploi

interior 9/3/06
A TIME. SWITCH IT OFF AND LET THE
MOTOR COOL FOR AT LEAST 1
MINUTE. Otherwise you risk damaging
the motor.
• Do not remove the jug from the motor
base while the appliance is in operation.
• Do not use the mixer while empty, as this
may damage it.

4. HOW TO USE THE APPLIANCE

Before using the mixer for the first time,
wash the removable parts: the top lid (A), the
jug lid (B), the jug (C) and the blade (F) in
warm soapy water and dry well before
reassembling.
Assembly
All assembly and disassembly operations
should be carried out while the appliance
is unplugged.
• Place the rubber seal (E) on the edge of the
blade (F) and place the blade on the
support connector (G) (Fig. 2).
• Attach to the jug by turning in an
anticlockwise direction (Fig. 3)
• Place the top lid (A) in the jug lid (B) by
inserting its flaps into the lid grooves and
then turning in a clockwise direction (Fig.4)
• Place the mounted jug on the base (Fig. 5)
• Place the ingredients in the jug and fit the
lid into place.
NOTE: To disassemble the mixer, follow the
above steps in reverse order.
Set up
• Place the assembled mixer on a stable
surface.
• Before switching the mixer on, make sure
that the jug is correctly fitted into its place
on the base.
• Make sure that the selector (I) is set to its
'0' position.
• Plug the appliance in.
• Place or pour the ingredients or
beverages to be mixed into the jug
through the jug opening or lid (B).
• Replace the lid (B) along with the top lid
(A) (Fig. 6) and switch the mixer on.
• To work continuously, place the selector
(I) in position '1', '2' or '3'.
07:34 Página 9
- To work at a low speed, turn the
selector to position '1'.
- To work at a medium speed, turn the
selector to position '2'.
- To work at a high speed, turn the
selector to position '3'.
• To work in programmable mode, which
causes the mixer to work in a
discontinuous fashion, turn the selector to
the position and hold there. When
the selector is released, the mixer will
automatically return to the '0' position.

5. PRACTICAL ADVICE

When using the mixer for making drinks,
wash all ingredients well and cut them into
pieces so that they fit into the mixer opening.
• For optimum results, it is best to mix small
rather than large quantities of food,
especially when the item in question is
very thick or heavy.
• Remove the top lid (A) from the jug lid (B)
in order to add ingredients to the jug (C)
while the motor is running.
• To avoid spillage, it is best to insert a
small quantity of food into the jug through
the lid opening, and then top up little by
little as the food is mixed.
• Do not fill the jug up to more than 2/3 of
its capacity, since the action of the blades
may cause it to overspill.
• It is best to place liquid ingredients into the
jug before solid ones. The liquid helps to
mix the items more quickly and at a lower
speed.
• Mix the ingredients for short times only
(between 5 and 30 seconds). Then check
the consistency and continue processing
until you obtain the consistency you
require.
• If the consistency you require is not
obtained rapidly, stop the appliance by
turning the selector to '0' and:
- Turn the selector to the
few times in a row, or
- Remove the jug lid and mix the food
items using a spatula, or
- Reduce the quantity of food to be
mixed.
• All fruit should be peeled and chopped
10
position a