Basic Repairs; Replacement Of The Rear Wheel With The Rds System / Disconnection Of The Motor Cable - BH bikes EASY MOTION EVO Manuel De L'utilisateur

EN
U S E R M A N U A L

BASIC REPAIRS

Replacement of the rear wheel with the RDS system / disconnection of the motor cable

To replace the back wheel you must disconnect the cable from the joint located behind the rear chainstay (1). Unscrew
the nut and also remove the rear washer, taking care to leave the opening of the black tube facing downwards (2).
Unscrew the nut on the left side (3), as well as the safety clamp, to be able to remove it (4). You can now take off the
wheel, replace it with a new one, and then repeat the process in reverse.
1
3
2
4
3 3