Specifi Cations; Technical Data - 3M Speedglas 9100 Air Directives D'utilisation

Occupational use of these products for eye and face protection must be in compliance with applicable health and
safety standards. In the US, employers must comply with the OSHA personal protective equipment (PPE) standard
(29 CFR 1910.132) and, as applicable, the eye and face standard (29 CFR 1910.133). In Canada, consult the
applicable standard(s) for your jurisdiction.
SPECIFICATIONS
Note: The 9100 Air and 9100 FX-Air welding helmets contain no component made from natural rubber
latex.
Eye and face protection Meets CSA Z94.3 and the High Impact requirements of Z87.1-2010
Head top impact None - does not offer head top impact protection
Operating Temperatures 23°F to 131°F (-5°C to 55°C)
5
Table 1. Specifi cations for 3M

Technical Data

V-Size ADF
1.8 x 3.7 in
Viewing Area (approx.)
(45 x 93 mm)
Battery Life (min.)
(2 x CR-2032) 2,800 hours
Solar Assist Yes
9100 FX Air Approx. Weight Comp.
Assy w/ SideWindows 34.2 oz (970 g)
9100 Air Approx. Weight Comp. Assy
w/ SideWindows 28.9 oz (820 g)
Dark Shades Shades 5, 8, 9, 10, 11, 12, 13
Light State Shade 3
Switching Speed < 0.1 ms (+23°C)
Special Modes Grind, Tack, Lock-in
Sensitivity Modes 5 levels
TIG Rating > 1 Amp
Number of Sensors 3 (2 eye-level, 1 center)
Delay (Recovery) Adjustable 40 - 1300 ms (approximate)
Temperature Range 23°F to 131°F (-5°C to 55°C)
Standards Compliance ANSI Z87.1-2010 High Impact requirements & CSA Z94.3-2007
Warranty 2 Years
Head sizes 6 ¼ to 8 (50-64 cm)
Shield PPA
Silver Front and ADF Housing Nylon
Headband Nylon, PP, PE, TPE
SideWindows Polycarbonate
Protection Plates Polycarbonate
Flame Resistant Fabric 75% FR-Cotton, 25% aramid synthetic fi ber
™ Speedglas ™ Welding Helmets
X-Size ADF XX-Size ADF
2.1 x 4.2 in 2.8 x 4.2 in
(54 x 107 mm) (72 x 107 mm)
2,500 hours 2,000 hours
Yes No
34.6 oz (980 g) 36.2 oz (1025 g)
29.3 oz (830 g) 30.2 oz (855 g)
6