Table des Matières
Publicité
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Inspect this product carefully before installation.
Claims for shipping damage made after the
product is installed will not be honored.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This unit requires ½" hot and cold supply lines
(not included).
• This unit includes a cutout template,
which must be used. Custom installations
may require additonal parts which cannot be
furnished by Hansgrohe.
• This unit must be completed with a trim kit. The
handshower must be installed.
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
approx. 5.8 GPM
2"
• Protection against back siphonage is provided by
a check valve (included with the trim kit) and by
an automatically resetting diverter (included with
the trim kit).
• To insure proper fit of the trim, the surface mate-
rial (tile, etc) must be installed prior to installation
of this rough.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicité
Table des Matières
