Cleaning The Ceramic Glass; Cleaning The Flue; Maintenance; The Display - klover DEA PLUS Manuel D'installation Et De Maintenance

Cleaning the ceramic glass

Always clean the glass when the stove is off and completely cold. Use a damp cloth and specific detergent for ceramic glasses. Do not use abrasive
sponges.

Cleaning the flue

This operation must be performed at least twice a year, at the beginning and half way through the winter season, and however when necessary.
It is necessary to check the presence of any blockages in the flue before switching the stove on, following a long period of inactivity.
If cleaning is not performed, the functioning of the stove and its components may be jeopardised.
The frequency of cleaning of the stove and the flue depend on the quality of the pellets used.
USE TOP QUALITY PELLETS TO OBTAIN THE BEST RESULTS.

Maintenance

Punctual and systematic maintenance is a fundamental component for correct functioning, excellent thermal performance and duration of the appliance
through time. Therefore, it is recommended that qualified staff check the stove at least once a year at the beginning of the season.
It is advised to agree an annual contract for product maintenance with the Authorised Technical Assistance Centre (TAC).

THE DISPLAY

The equipment's functioning state is displayed by the console. Many types of displays and the available settings based on the selected menu can be made
by accessing the menu.
The following figure shows the display in equipment on or off conditions.
ROOM TEMPERATURE
1
2
1
2
The following figure describes the meaning of the state signals on the display's left wall (1st LED SERIES).
CLOCK
17:19
24.5°C
WORK
Set
3
!
DIALOGUE
1st LED
SERIES
Set
3
!
11
SET POWER SET
P-3
3
2
4
EFFECTIVE WORK POWER
(in modulation)
2nd LED
SERIES
4
6
5
6
5