Dear Customer,
Carefully read the warranty certificate you will find on the last page of this User Guide; we recommend you call the Authorised Technical Assistance Centre
(TAC) for commissioning and calibrating the stove.
We would like to thank you again for trusting KLOVER products and we also inform you that these models are the result of forty years experience in the
field of construction of solid fuel products for domestic heating.
Every single detail that composes the stove has been realised by qualified staff, using the most modern equipment.
The manual contains a detailed description of the stove and its functioning, instructions for proper installation, basic maintenance and control points, which
must be periodically performed; furthermore it contains practical advice which helps to obtain maximum performance from the stove with minimum fuel
consumption.
The heat input produced by the stove can change depending on used pellet.
Enjoy the heat with KLOVER!
Technical Support
Klover pellet stoves are imported and distributed by FirePower Heating, Capton, Dartmouth, Devon, TQ6 0JE.
UK technical and product support is provided by FirePower Heating who can be reached on 0844 3320156.
Copyright
All rights reserved. The reproduction of any part of this manual, in any form, without the explicit written permission of KLOVER srl is forbidden. The content
of this manual can be modified without forewarning. Although we have carefully collected and verified the documentation contained in this manual,
KLOVER srl cannot be held liable for how you utilise it.
Copyright © 2013 KLOVER srl
Latest revision: 1.1 – March 2014
INTRODUCTION
Important security instructions
Read these instructions before installing and using the product.
Stove installation and commissioning must be performed by skilled staff aware of the importance of respecting the Safety Standards in
force. They will be responsible for the definitive installation of the equipment and its consequent proper functioning.
KLOVER srl will not be held responsible if these precautions are not respected.
During installation of the appliance all local regulations, included those referring to National and European Standards, must be followed.
Connect the product flue gas outlet to a flue that has the features given in the Connections section in this user guide.
The appliance is not suitable for the installation on a shared flue system.
If the flue should catch fire, you must be provided with appropriate systems for damping down the fire or call the fire service.
Connect the product to sockets with earth. Avoid using sockets controlled by switches or automatic timers.
Do not use a damaged or worn power supply cable.
If a multiple socket is used, make sure that the total voltage of the connected devices does not exceed that supported by the socket. Furthermore
make sure that the total voltage of all these devices connected to the socket does not exceed the maximum level accepted.
Do not use flammable substances to clean the appliance and its elements.
Do not leave containers and flammable substance in the place where the stove is installed.
Do not use the appliance as incinerator or in any other way different from that for which it has been designed.
Do not use fuels different to those which are recommended.
Do not use liquid fuels.
External surfaces of the appliance reach high temperatures when it is running; operate with caution in order to avoid burns.
Only use original spare parts recommended by the manufacturer.
Do not perform any unauthorised modification to the appliance.
The use of poor pellets or pellets made of any other material can lead to damage of the stove functions and can also make the warranty null
and void and make the manufacturer exempt from all responsibility.
The Klover pellet products are not suitable for use in smokeless zones.
Some Precautions
Do not touch the hot components of the product (ceramic glass, flue pipe) during normal functioning.
Use the appropriate button to switch the electrical panel off. Do not disconnect the power supply cable while the stove is running.
Keep children away from the stove when it is running since they could get burned by touching its hot components.
Children and inexperienced people are not allowed to use the appliance.
NEVER open the door of the stove while it is running.
Destination of use
The new automatic operation DEA Plus stove by Klover has been designed for heating your home.
The stove works exclusively with wood pellets and only with the hearth door shut. Never open the door when the appliance is running.
The stove has a DOUBLE COMBUSTION system that guarantees an extraordinary efficiency average and "clean" flue gas exhaust with an emission of CO
in the atmosphere which is among the lowest in Europe.
Do not use the stove in disagreement with the indications contained in this user guide. The stove is an indoor product.
This user guide is integral part of the stove.
If the product is transferred the user must give this manual to the new purchaser.
KLOVER S.R.L. DECLINES ANY RESPONSIBILITY IN CASE OF ACCIDENTS DUE TO THE FAILURE TO COMPLY WITH THE SPECIFICATIONS OF
THIS MANUAL.
FURTHERMORE, KLOVER S.R.L. DECLINES ANY RESPONSIBILITY DUE TO INCORRECT USE OF THE PRODUCT BY THE USER, MODIFICATION
AND/OR UNAUTHORISED REPAIRS, USE OF NON - ORIGINAL SPARE PARTS OR SIMPLY NOT SPECIFIC FOR THIS PRODUCT.
KLOVER S.R.L. IS NOT RESPONSIBLE FOR INSTALLATION OF THE THERMO STOVE. THE INSTALLER IS THE ONLY PERSON RESPONSIBLE
FOR THIS OPERATION AND HE IS ALSO ENTRUSTED WITH CHECKING THE FLUE, THE EXTERNAL AIR VENT AND THE CORRECTNESS OF
we would firstly like to thank you for choosing a "KLOVER" stove and we hope you will be satisfied with this product.
2