Wash Cycles And Functions; Table Of Wash Cycles; Wash Functions - Hotpoint Ariston RPD 965 D Mode D'emploi

Wash cycles and functions

Table of wash cycles

Description of the wash cycle
DAILY CLEAN
Anti-Stain Power 20°C
1
2 Anti-Stain Turbo 45'
3 Cotton: lightly soiled resistant and delicate colours.
4 Synthetics (4): lightly soiled resistant colours.
Fast 30': to refresh lightly soiled garments quickly (not suitable for wool, silk
5
and clothes which require washing by hand).
SPECIALS
Colour Care (default) => Colours
6
7 Ultra Delicates
8 Wool: for wool, cashmere, etc.
9
Eco Cotton 60°C (1): heavily soiled whites and resistant colours.
60°/40°
9
Eco Cotton 40°C (2): lightly soiled resistant and delicate colours.
60°/40°
9 Cotton (3): lightly soiled resistant and delicate colours.
10 Baby
EXTRA
11 Anti-Allergy
12 Bed & Bath 7 Days: for bedlinen and towels.
13 Silk & Curtains: for garments in silk and viscose, lingerie.
14 Duvets: for down-stuffed garments.
Partial Programmes
Rinse
Spin + Pump out
Pump out only *
*
If you select programme and exclude the spin cycle, the machine will drain only.
**
The duration of the wash cycle can be checked on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with regulations 1061/2010: set wash cycle 9 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulations 1061/2010: set wash cycle 9 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C . The actual washing temperature may differ from the indicated value.
For all Test Institutes:
3) Long wash cycle for cottons: set programme 9 at temperature 40°C and press the DIRECT INJECTION button under "Power" mode.
4) Long wash cycle for synthetics: set wash cycle 4 with a temperature of 40°C.

Wash functions

! If the selected function is incompatible with the set pro-
gramme, the relevant indicator light will appear dimly lit; in
addition, the incompatibility will be signalled by a buzzer
(3 beeps) and the wording "No Selection" will appear on
the display.
! If the selected function is incompatible with another pre-
viously set function, the wording "No Selection" will appear
on the display and the function will not be enabled.
Time Saver
If you select this option, the wash cycle duration will be redu-
ced by up to 50%, depending on the selected cycle, thereby
guaranteeing simultaneous water and energy saving. Use this
cycle for lightly soiled garments.
Colour Care
Setting cycle 6 and selecting this function allows for choosing
among 3 different programmes specially designed for optimal-
ly preserving colour intensity and the brilliance of whites:
Detergents
Max. Max.
temp. speed
(°C) (rpm)
20° 1600
 
20°
1200
 
(Max. 40°C)
40°
1600
 
(Max. 90°C)
40°
1000  
(Max. 60°C)
30° 800
 
40° 1600
 
30° --
 
40° 800  
60° 1600
 
40° 1600  
40° 1600
 
40° 1000  
60° 1600  
60° 1600
 
30°
--  
30° 1000
 
- 1600 -

- 1600 - -
- -- - -
Colours: used to wash light coloured clothes. This program-
me is designed to maintain bright colours over time.
Darks: this programme is designed to maintain dark colours
over time. We recommend using a liquid detergent for best
results, preferably when washing dark-coloured garments.
Whites: this programme is designed to maintain the brightness of
white clothes over time. Use powder detergent for best results.
Super Wash
This option offers a high-performance wash due to the greater
quantity of water used in the initial phase of the cycle, and due
to the increased wash cycle duration, is particularly useful for
the removal of stubborn stains. It can be used with or without
bleach. If you desire bleaching, insert the extra tray compart-
ment 3. When pouring in the bleach, be careful not to exceed
the "max" level marked on the central pivot (see figure pag.
10). To bleach laundry without carrying out a full wash
cycle, pour the bleach into the extra compartment 3, select
the cycle and activate the function
- 9 - - - **
- 4,5 - - - **
9 - - - **

 4,5 46 0,65 62 100'
- 3,5 71 0,19 47 30'
- 5 - - - **
- 1 - - - **
- 2 - - - **
- 9 44 0,93 51,8 340'
- 9 44 0,93 88 340'
- 9 44 0,96 88 195'
- 5 - - - **
- 5 - - - **
9 - - - **

- 2 - - - **
- 3,5 - - - **
9 - - - **

- 9 - - - **
- 9 - - - **
.
9
GB