Mettler Toledo IND780 Guide D'installation page 85

Figure 2-94 shows the array of status indicator LEDs on the ControlNet card (see also Figure
2-93).
Figure 2-95 shows an example of a ControlNet cable, and a close-up view of the connector. Note
that the connector may be right-angled or straight. This cable is not supplied by METTLER TOLEDO.
64057253 | 14 | 08/2014
Module Status
Figure 2-94: ControlNet Status Indicator LEDs
When the ControlNet option is installed in a harsh environment terminal, the cable with the
straight connector must be used.
Figure 2-95: ControlNet Cables and Connector
1 2
Channel A
4 3
Module Channel B
METTLER TOLEDO IND780 Installation Guide
2-61