Mettler Toledo IND780 Guide D'installation page 78

Figure 2-83 shows the IDNet harness. One end attaches to the option board, and the threaded body
of the connector mounts in one of the keyed holes in the back of the Panel or Harsh Enclosure, with
its nut on the outside of the enclosure. Route the harness wire away from any Analog Loadcell
Boards to protect the IND780 from external influences. Refer to Figure 2-21 and Table 2-1 for the
Harsh enclosure mounting position.
The IDNet cable is required to connect between the option board and the enclosure case. The cable
is configured as shown in Figure 2-84.
2-54
METTLER TOLEDO IND780 Installation Guide
Figure 2-82: IDNet Option Board
Figure 2-83: IDNet Harness
IDNet Cable 64062067
P1 P2 Color
P1-G N.C.
P1-D P1-A Green
P1-M P2-1 Orange
P1-L P2-2 Black
P1-K P2-3 Violet
P1-E P2-4 Red
P1-F P2-5 White
Remarks
Jumper
RxD1-
TxD1+
TxD1-
RxD1+
RxD-
64057253 | 14 | 08/2014