Mettler Toledo IND780 Guide D'installation page 17

Number of Cells
Number of Scales
Flow Meters
Analog/Digital Update Rates
Load Cell Excitation Voltage
Minimum Sensitivity
Keypad
Communications
Approvals
1-8 METTLER TOLEDO IND780 Installation Guide
IND780 Specifications
Eight 350-ohm load cells (2 or 3 mV/V) per analog channel; (16) 350Ω
per terminal
Interface for up to four scale channels plus a sum
Up to four flow meter channels, for a maximum of four devices (scales
or flowmeters)
Internal Analog: >366 Hz
IDNet: determined by base
POWERCELL MTX, POWERCELL PDX: determined by cell
Target Comparison: 50 Hz
PLC Interface: 20 Hz
10 VDC
0.1 microvolts
30 keys; 1.22-mm thick polyester overlay (PET) with polycarbonate
display lens
Serial Interfaces
Standard: Two serial ports COM1 (RS-232) and COM2
(RS-232/RS-422/RS-485), 300 to 115,200 baud; Ethernet 10/100 Base-T
Protocol
Serial Inputs: ASCII characters, ASCII commands for CTPZ (Clear, Tare,
Print, Zero), SICS (most level 0 and level 1 commands)
Serial Outputs: Continuous or Demand with up to ten configurable print
templates or SICS host protocol, report printing, interfaces with external
ARM100 Input/Output modules, and DeviceNet Bridge
Weights and Measures
USA: NTEP CoC # 06-017
Class II, 100,000d
Class III, IIIL, 10,000d
Canada: AM-5592
Class II 100,000d
Class III 10,000d and Class IIIHD 20,000d
Europe: TC6944
Class II, approved divisions determined by platform
Class III, IIII, 10,000e
Hazardous Areas (IECEx UL 10.0014X)
EX nA nL (nL) IIB T4
Ex tc IIIC T85°C Dc IP69K (Harsh) or IP65 (Panel)
-10°C ≤ T amb ≤+40°C
Product Safety
UL, cUL, CE
64057253 | 14 | 08/2014