Mettler Toledo IND560 Guide D'installation page 15

Display
Weight Display
Scale Types
Number of Cells
Number of Scales
Analog/Digital Update Rates
Load Cell Excitation Voltage
Minimum Sensitivity
Keypad
Communications
IND560 Installation Manual
IND560 Specifications
128 × 64 dot-matrix graphic VFD display, 21 mm
Display Update Rate: 10/second
Displayed resolution of 100,000 counts for analog load
cell scales
Display resolution for high-precision IDNet bases is
determined by the specific base used
Analog load cells or
IDNet, High-Precision K Line (T-Brick type standard)
Eight 350-ohm load cells (2 or 3 mv/V)
Interface for one analog or one IDNet scale
Internal: Analog: >366 Hz; IDNet: determined by base;
Target Comparison: 50 Hz;
PLC Interface: 20 Hz
10 VDC
0.1 microvolts
25 keys; 1.22-mm thick polyester overlay (PET) with
polycarbonate display lens
Serial Interfaces
Standard Serial port:
• COM1 (RS-232/RS-422/RS-485), 300 to
115,200 baud
Optional Ethernet/Serial Port/USB(s):
Ethernet 10 Base-T with two additional serial
•
ports, COM2 (RS-232) and COM3 (RS-232/
RS-422 / RS-485)
or
• Ethernet 10 Base-T with one additional serial
port, COM3 (RS-232/RS-485), and one USB
host port
Protocol
Serial Inputs: ASCII characters, ASCII commands for
CTPZ (Clear, Tare, Print, Zero), SICS (most level 0 and
level 1 commands)
Serial Outputs: Continuous or Demand with up to five
configurable print templates or SICS host protocol, report
printing, interfaces with external ARM100 Remote
Input/Output modules. Optional COM-560 Application
Software available for legacy serial protocols.
1-5