BH FITNESS LK500Ri Guide D'utilisation page 17

STEP 3
Assemble the Rear Foot Stabilizer (C) and the
Rear Frame (B) with Truss Hex Screw (K05) and
Spring Washer (K06).
STEP 4
Connect the wiring from the Right
Handlebar (N), to the Rear Frame
(B), and then attach the right
handlebar to the rear frame with Hex
Screws (K07) and Spring Washers
(K08). Do the same for the Left
Handlebar (M). Finally, place the
Cup Holders (P) into the holes on
the handle bars. To secure, tighten
clockwise.
17