GreenWorks Commercial GE 080 Guide D'utilisation page 4

IMPORTANT SAFETY INSTRUCTIONS
• Do not open or mutilate the batteries. Released electrolytes are corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
• Exercise care not to short the battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear
protective hair covering to contain long hair.
• Do not add unnecessary force to your power tool – It will do the job better and with less
likelihood of a risk of injury at the rate for which it was designed.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
• For use only with
with GC 400 charger.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal
to another. Shorting the battery terminals together may cause a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, seek medical help immediately.
Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or power tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Keep guards in place and in working order.
• Keep blades sharp.
• Keep hands and feet away from cutting area.
W A R N I N G (PROPOSITION 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with
approved safety equipment, such as dust masks that are specially designed to filter out microscopic
particles.
(GL 200, GL 250, GL 300, GL 400, GL 500, GL
SAVE THESE INSTRUCTIONS
4
900) battery. For use only