ASROCK K10N750SLI-WiFi Mode D'emploi page 20

Step 8. Connect a VGA cable or a DVI-I cable to the monitor connector and the DVI
connector of the graphics card that is inserted to PCIE2 slot.
Step 9. Connect a 4-pin ATX power cable to SLI/XFIRE power connector.
Step 10. Install the graphics card drivers to your system. After that, you can enable the
Multi-Graphics Processing Unit (GPU) feature in the NVIDIA
system tray utility. Please follow the below procedures to enable the multi-
GPU feature.
For Windows
A. Click the NVIDIA Settings icon on your Windows
B. From the pop-up menu, select nView Desktop Manager, and then
click nView Properties.
C. From the nView Desktop Manager window, select the Desktop
Management tab.
D. Click Properties to display the Display Properties dialog box.
2 0 2 0 2 0
2 0 2 0
ASRock
®
XP / XP 64-bit OS:
K10N750SLI-WiFi Motherboard
®
nView
®
taskbar.