Wired Controller Installation - Gree GRS-2.4/D270ANbA-K Manuel D'installation

3.8 Wired Controller Installation

3.8.1 Requirements for Wired Controller Installation Locations
(1) Do not install the wired controller in a wet place or a place exposed to direct
sunlight.
(2) Do not install the unit or wired controller of the air source water heater in a
place susceptible to electromagnetic interference.
(3) Ensure that the communication line is connected to the correct interface.
Otherwise, communication will be failure.
3.8.2 Wired Controller Installation
No.
Name
wired controller
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
1
Front panel of
Fig. 3-3 Accessories of Wired Controller
Air Source Heat Pump Water Heater
2
Soleplate of
Screw
controller
17
3 4
Socket's base
box installed
in the wall