Basic Requirement For The Installation Position; Selection For Installation Positions - Gree GRS-2.4/D270ANbA-K Manuel D'installation

(6) The water passed through the iron-exchange water softener will accelerate
the consumption of magnesium rod of water tank. Therefore, you are not
suggested connecting the water softener to the water inlet of air source water
heater.

3.2 Basic requirement for the installation position

If the product is installed at below places, it may cause malfunction for the air
source water heater. If it's unavoidable, please contact local Gree appointed
maintenance center to purchase special models.
(1) There are thermal sources, steam, flammable gas and explosive or volatile
substances.
(2) There are high-frequency equipments, such as welding machines, medical
facilities.
(3) Coastal places.
(4) There's oil (machine oil) in the air.
(5) There's sulfureted gas (sulfur spring).
(6) Special places.

3.3 Selection for installation positions

(1) Suggest to install the unit indoors.
(2) The noise and discharge air won't disturb neighbours, animals or plants.
(3) Make sure the good ventilation for the water heater; air inlet and air outlet of
water heater can't be blocked.
(4) The installation position should bear the weight and vibration for the water
heater.
(5) Select the dry place. The unit can't be exposed at direct sunshine or strong
wind.
(6) Make sure the heat exchanger comply with the requirement of the installation
drawing issue; the unit should be installed at the place where's convenient for
maintenance and inspection.
(7) Select the place where is beyond the children.
(8) Do not affect the public passage and the city appearance.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Air Source Heat Pump Water Heater
11