Wheel Fork; Transport Handle; Charger - Blitz HydroLift S3 2–6.2-DC Mode D'emploi

5.2 Wheel fork

Ø min.
570 mm
10"

5.3 Transport handle

Position 1:
The rollers are braked automatically.
Position 2:
The lifting unit can be moved.

5.4 Charger

The charger is suitable for lead acid batteries as well as
batteries suitable for deep discharge.
The supply line must be protected on site with 16 A.
Nominal data charger:
Voltage: 100-240 V Frequency: 50/60 Hz Rated power: 300 W Output voltage: 28 V
Required cable cross-sections when using extension cables with 16 A pre-fuse.
Cable length in (m)
Cross section in mm²
126746
Wheel diameter / Rim size
Ø max.
1.300 mm
22. 5"
7.5
1.5
Construction and function
15
2.5
HydroLift
1
2
30
4
85