Permitted Hydraulic Oils; Torque Table For Screws - Blitz HydroLift S3 2–6.2-DC Mode D'emploi

11.10 Permitted hydraulic oils

Hydraulic oils with a viscosity of 22 cSt at 40° C are permissible.
The following oils may be used.
ARAL:
BP:
ESSO:
FINA:
FUCHS:

11.11 Torque table for screws

Tightening torque (Nm) for screws
Strength class 8.8
0.10*
M8 20
M10 40
M12 69
M16 170
M20 340
M24 590
* Sliding friction coefficient 0.10 for very good surface, lubricated.
** Sliding friction coefficient 0.15 for good surface, lubricated or dry.
*** Sliding friction coefficient 0.20 Surface black or phosphated, dry.
126746
◼
For the hydraulic system, only use hydraulic oils according to DIN 51524.
◼
The water content of the hydraulic oil must not exceed 2%.
◼
Do not mix different types of oil.
◼
Oils and greases are substances hazardous to water. Always dispose of in
an environmentally sound manner, according to the provisions in force in
your country.
Vitamin
Energol HLP 22, HLP – D 22
ESSTIC 22, Nuto H22
Hydran 22, Circan 22
Renolin MR, Renolin B
0.15** 0.20***
25 30
50 60
87 105
220 260
430 520
740 890
MOBIL OIL: Mobil D.T. E
SHELL: Hydrol DO 22
TEXACO: RandoOil 22,
VALVOLINE: ETC
VEDOL: Andarin 22
Strength class 10.9
0.10*
M8 30
M10 59
M12 100
M16 250
M20 490
M24 840
HydroLift
Maintenance
0.15** 0.20***
37 44
73 87
125 151
315 380
615 740
1050 1250
111