Technical Data; Order List - Dräger X-cal 2000 Notice D'utilisation

Maintenance
5 Maintenance
5.1 Cleaning
1. Disconnect the X-cal 2000 breath alcohol simulator power before cleaning.
CAUTION
!
Risk of burns!
After disconnecting the X-cal 2000 simulator power, allow 10 to 15 minutes for the
heating element to cool off before detaching the top housing.
2. Do not submerge the top housing in water.
3. Clean the top housing by wiping with a water dampened cloth.
4. Wash the solution container with plain water and dry with paper towels.
6 Disposal
This product must not be disposed of as household waste. This is indicated by the ad-
jacent symbol. You can return this product to Dräger free of charge. For information
please contact the national marketing organisations or Dräger.
7

Technical data

Height: 200 mm

Diameter: 105 mm

Weight: 1.1 kg (with power supply but w/o solution)

Operating temperature: 23 °C ± 5 °C

Storage temperature: 5 to 40 °C

Storage humidity: 10 to 85% RH

Warm-up time from cold start: < 15 minutes

Recovery time from test: < 5 seconds

Power supply rating: 24 VDC, 2.5 A, works with both 110 V and 220 V supplies

8

Order list

Name and description
Dräger X-cal 2000 complete
Ethanol standard solution (0.476 mg/L); 0.5 L
Ethanol solution certified (0.400 mg/L); 5.5 L
Ethanol solution certified (0.250 mg/L); 0.5 L
Calibration adapter (100 pcs)
Calibration sticker (100 pcs)
16
Order No.
83 26 000
67 28 838
36 03 386
36 02 949
68 05 473
68 05 739
Dräger X-cal 2000