Electrical Connection; Ventilation Requirements; Installing The Appliance - Atag KF8178ADR/A01 Notice D'utilisation

24
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.

Ventilation requirements

min.
5 cm
200 cm

Installing the appliance

Caution! Make sure that the mains
cable can move freely.
2
min.
200 cm
2
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
The airflow behind the appliance must be
sufficient.
Do the following steps:
Apply the adhesive sealing strip to the ap-
pliance as shown in figure.