MSI Z370 GAMING PRO CARBON Présentation Rapide page 50

fCPU GT Under Voltage Protection [Auto]
Sets the voltage limit for CPU GT under-voltage protection. If set to Auto, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
fCPU Lite Load [Auto]
This item is used to reduce the CPU power and temperature under non-
overclocking and non-overvoltage conditions. Select higher mode if system is
unstable. Auto is the recommended.
fCPU GT Over Current Protection [Auto]
Sets the current limit for CPU GT over-current protection. If set to Auto, BIOS will
configure this setting automatically.
fCPU GT Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU GT voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to Auto, BIOS will configure this setting
automatically.
fCPU GT VRM Over Temperature Protection [Enabled]
Enables or disables the CPU GT VRM for over-temperature protection. The CPU GT
frequency may be throttled when VRM temperature over the specified value.
f CPU Core/ GT Voltage Mode [Auto]*
Sets the CPU Core/ GT voltage mode.
[Auto]
[Adaptive Mode]
[Override Mode]
[Offset Mode]
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
f CPU Voltages control [Auto]
These options allow you to set the voltages related to CPU. If set to Auto, BIOS will set
these voltages automatically or you can set it manually.
f DRAM Voltages control [Auto]
These options allow you to set the voltages related to memory. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
f PCH Voltages control [Auto]
These options allow you to set the voltages related to PCH. If set to Auto, BIOS will set
these voltages automatically or you can set it manually.
40
BIOS Setup
This setting will be configured automatically by BIOS.
Sets the adaptive voltage automatically for optimizing the system
performance.
Allows you to set the voltage manually.
Allows you to set the offset voltage and select the voltage offset
mode.
offset voltage.