Télécharger Imprimer la page

Hella 8NF 012 417-00 Instructions De Montage page 26

Publicité

EN
ENGLISH
Technical data
Dimensions (LxWxH):
Weight:
Materials:
Degree of protection (IP code), lamp:
Degree of protection (IP code), module:
Lighting technology
Lamp luminous fl ux:
Residual luminous fl ux:
Temperature rating:
Electrics, module and lamp
Lamp type:
26
Ballast:
Control:
Mains connection:
Protection class:
System performance approx.
at an ambient temperature of 25 °C:
Power factor:
Overvoltage resistance:
Current carrying capacity:
Connection:
Declarations:
*Notes on installation:
557 x 411 x 155 mm
7.4 kg incl. 3 modules
6.4 kg incl. 2 modules
5.5 kg incl. 1 module
Housing, cover and bracket made of steel with protective coating
IP 65
IP 65
7.500 lm / 15.000 lm (3 modules)
5.000 lm / 10.000 lm (2 modules)
2.500 lm / 5.000 lm (1 module)
80% a er 50,000 operating hours
-40 °C to +40 °C
3 Frame with 3 LED modules
2 Frame with 2 LED modules
1 Frame with 1 LED module
Electrically integrated into the module
Is obtained via DALI, 1-10V or twilight switching (100% / 50%)
See module label
SK II
See module label
>= 0.95
6 kV
2.5 kA
Lamp connection side 3 or 4 poles
Cable gland M20 for diameter 7 - 13 mm
Labeled in accordance with 2002/96/EG, the Waste Electrical and Electronic Equipment Directive:
The device must be taken to a properly run recycling facility.
*All data refers to the connection and operation of a single lamp. When installing and using
more than one lamp, the applicable legal requirements for a proper electrical installation
must be observed.
Subject to alteration without notice.

Publicité

loading