3com AirConnect 9550 Guide De Mise En Route page 4

AP Features
LEDs
Slots for wall
mounting
Connectors for optional antennas
Feature
Ethernet Port
LEDs
Antenna Connectors
Reset Button
RJ-45 Console Port
Wall-Mounting Bracket
and Table-Top Stand
RJ-45 Console Port
Description
The Ethernet port provides a 10/100/1000 BASE-T Ethernet connection
to a switch. Use a suitable Category 5 cable with straight-through
wiring and standard RJ-45 connectors to connect your AP to the
network.
The LEDs indicate power and activity. See "Checking the LED
Indicators" on page 8 for details.
The AP has three built-in internal antennas. In addition, three RSMA
antenna connectors allow you to connect optional external antennas.
To restore factory settings, during power-up, press the Reset button and
hold it for 5 or more seconds.
Provides a serial interface to the AP for diagnostic use. Default: 115.2K
speed, 8 bits, no parity, 1 stop bit.
The combined wall-mounting bracket and table-top stand allows you to
mount the unit on a wall or stand it on a table top.
Reset Button
Wall Mounting Bracket/
Table Top Stand
Ethernet Port
2
Slots for desktop
mounting