Remote Control Via Apps - oneConcept Streamo Chef Mode D'emploi

EN
BT
Selecting an audio source: Press [ENTER] (4) repeatedly until 'BT' appears
on the display.
Make sure that no other BT device is connected to the radio. 'No
Connection' will appear on the display.
Activate BT mode on the device that you want to connect. Look for
The radio on the list of detected devices on the BT device (refer to the
instruction manual of the device). Once the devices have found each other,
the radio will appear as 'Streamo Chef' on the BT device.
Select 'Streamo Chef' from the list. If you are required to enter a PIN code,
enter 0000 (four zeros). Certain devices may also require you to approve the
connection.
Once the connection has been successful, 'Connected' will appear on the
display of the radio.
Start playback on your BT device.
Control the playback from the BT device or from the radio using the Vol+/
Vol- on the device. Adjust the volume both on the BT device and the radio.
To disconnect a connected BT device: Press and hold down the Enter button
for 3 seconds. The message 'No Connection' will appear on the display.

REMOTE CONTROL VIA APPS

Some apps for Android, e. g. Air Music Control, let you control the internet
radio from your smart phone or tablet.
As soon as the devices are connected, the same menu structure shown on
the internet radio will appear on the smart phone/tablet. You can select all
functions just like on the radio. The selected functions /menu items shown
on the radio will change according to the actions taken on your mobile
device.
If you are controlling the internet radio via app, a UPnP connection to
Windows Media Player may not be possible.
55