Cleaning And Care - AEG 4Safety PRECISION DB61 Série Mode D'emploi

Cleaning and care

1. Always store iron on its heel rest.
To clean exterior surfaces, use a damp
soft cloth and wipe dry. Do not use
any chemical solvents, as these will
damage the surface. Do not store the
iron with water in the tank. Wind the
mains cord around the cord storage
facility.
2. Self-cleaning function. Fill the iron
with water and heat up the iron. When
the indicator light turns green, unplug
the iron. Hold the iron over a sink,
press and hold the cleaning button.
Use a full tank of water. Release button
to stop self-cleaning function. Repeat
the procedure if necessary.
NOTE! Do not use any descaling fluid
or vinegar.
3. Cleaning the soleplate. Do not use
scouring pads or harsh cleaners on
the soleplate as these will damage
the surface. To remove burnt residue,
iron over a damp cloth while iron is
still hot. To clean the soleplate, simply
wipe with soft damp cloth and wipe
dry.
d
GR
NL
F
GB
21