Perel GSSAW1 Mode D'emploi page 3

5. Installation
When installing the awning, make sure to install both the cassette and the
supporting post at the same level to avoid deformation of the fabric and difficulty
5.1 Installing the Cassette
1. Choose a suitable mounting location. Make sure the wall to which the cassette will be fixed is strong
enough to hold the weight of the cassette.
2. Take the measurements based on the cassette. Use the brackets to determine the spacing of the
mounting holes. Drill four holes, each of 6 cm deep.
3. Insert a nylon plug in each of the holes.
Fix the brackets using the M6x60
screws.
V. 01 – 22/01/2015
GSSAW1
when opening and closing the awning.
3 ©Velleman nv