Contents Of Packing Box - Struers Accutom-2 Mode D'emploi

10
Accutom-2
Instruction Manual

4. Contents of Packing Box

Remove the upper clamps on the transportation box with a screwdriver, so
that the lid can be removed. Open the plastic bag and remove all loose
parts. Take off the lower clamp and remove the casing. Remove the 4 bolts
which keep the wooden bottom in place, and the apparatus is ready to be
installed.
Check that besides the Accutom-2 basic unit the following loose parts are
present:
1 Splash guard, plastic
1 Bottom part for same
1 Flange set, Ø 65 mm
1 Flange set, Ø 42 mm
1 Screw for spindle shaft
1 Dial gauge
1 Two-pin spanner
1 Hexagon key, 2 mm
1 Hexagon key, 2.5 mm
1 Hexagon key, 3 mm
1 Hexagon key, 4 mm
1 Hose connection
2 Hose clips S13
1 Reinforced PVC tube, inside Ø 5/16", 2 m
1 Latex tube, inside Ø 8 mm, 2 m
1 O-belt