Main Specifications - Roland CUBE Monitor CM-110 Mode D'emploi

Main Specifications

Roland CM-110, CM-220: CUBE MONITOR
Rated Power Output
Nominal Input Level (1 kHz)
Input Impedance
Digital Input (CH 3)
Main Unit
Speakers
Satellite Speaker
<Channel Control>
<Woofer Control>
Controls
<Master Control>
Connectors
Power Consumption
Main Unit
Dimensions
Satellite Speaker
Main Unit
Weight
Satellite Speaker
Accessories
* 0 dBu = 0.775 Vrms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
10
CM-110
100 W
(Main Unit 50 W + Satellite Speaker 25 W x 2)
CH 1 (INSTRUMENT): -20 dBu
CH 2 (LINE): -10 dBu
BALANCED INPUT: +4 dBu
CH 1 (INSTRUMENT): 10 k ohms
CH 2 (LINE): 10 k ohms
BALANCED INPUT: 10 k ohms
Format: Conformity with IEC60958
Sample Rate: 32 kHz to 192 kHz (automatically) (de-emphasis: OFF)
Word Length: 24 bit
16 cm (6.5 inches)
10 cm (4 inches, Magnetically-Shielded), 2 cm (3/4 inch, Magnetically-Shielded) (for each)
[CH 1] (INSTRUMENT) volume knob
[CH 2] (LINE) volume knob
[CH 3] (DIGITAL) volume knob
[WOOFER] volume knob
[PHASE] switch
EQUALIZER [HIGH] knob, [LOW] knob
[MASTER] volume knob
[AUTO OFF] switch
[ON] switch
CH 1 (INSTRUMENT) jacks (L/MONO, R): 1/4-inch phone type
CH 2 (LINE) jacks (L, R, STEREO): RCA phono type, Stereo miniature phone type
CH 3 (DIGITAL) jack: RCA phono type
BALANCED INPUT jacks (L, R): XLR, 1/4-inch TRS phone type
PHONES jack: Stereo miniature phone type
SATELLITE SPEAKER jacks (only for dedicated Satellite Speakers)
AC IN jack
47 W
330 (W) x 327 (D) x 368 (H) mm
13 (W) x 12-7/8 (D) x 14-1/2 (H) inches
162 (W) x 197 (D) x 243 (H) mm
6-7/16 (W) x 7-13/16 (D) x 9-5/8 (H) inches
13.3 kg / 29 lbs 6 oz
3.1 kg / 6 lbs 14 oz(for each)
Power Cord, Speaker Cable (3.5 m) x 2, Owner's Manual
CM-220
200 W
(Main Unit 100 W + Satellite Speaker 50 W x 2)
25 cm (10 inches)
67 W
381 (W) x 376 (D) x 413 (H) mm
15 (W) x 14-13/16 (D) x 16-5/16 (H) inches
18.8 kg / 41 lbs 8 oz