Included Items - Yamaha SWK-W10 Mode D'emploi

■ Introduction
SWK-W10 is a receiver for subwoofer signals
transmitted wirelessly from the transmitting-side
Yamaha product (such as YIT-W10, YSP-5100, and
YSP-4100). By connecting SWK-W10 to your
subwoofer (with internal amplifier) using a
subwoofer cable, you can enjoy received bass sounds
for subwoofer. Also, since the power and volume
level of the subwoofer are controlled in conjunction
with transmitting-side operations (Yamaha
"AirWired" technology), this unit provides a simple
operation.

■ Included items

Check that you have received all of the following
items.
SWK-W10
OWNER'S MANUAL
■ Using SWK-W10
1 Keep this unit and your subwoofer (with
internal amplifier) unplugged from AC
wall outlets.
2 Set the group ID of this unit to one used
on the transmitting-side Yamaha product.
The group ID is set by using 2 group ID switches.
When you set the group ID to "B2", set each
switch to "B" and "2".
L
/ SUBWOOFER
A B 1 2 3
R
GROUP ID AUDIO OUTPUT
A B 1 2 3
GROUP ID
GROUP ID switch
y
• For information about the group ID of the
transmitting-side Yamaha product, refer to the
manual supplied with the transmitting-side
Yamaha product.
• If the transmitting-side product is not equipped
with an A/B switch, set the A/B switch of this unit
to "A".
3 Install this unit on or near your
subwoofer.
When you install this unit on your subwoofer, this
unit may be moved by vibration. In this case,
install this unit elsewhere or fix this unit not to be
moved.
AC OUTLET
3
En