OPERATION
This coffee grinder allows you to grind coffee beans
quickly and easily, so that you can always enjoy a
fresh cup of coffee. You can grind up to 50 grams of
coffee beans in the coffee grinder at one time. The
coffee grinder is safeguarded by a shut-off system: the
appliance can only be switched on if the lid is properly
tightened.
uSING FOR THE FIRST TIME
• Remove all packaging from the appliance.
• Clean the appliance, see 'Cleaning and
Maintenance'.
• Continue with the procedure in 'Using the
appliance'.
uSING THE APPLIANCE
• Open the lid by turning it anticlockwise.
• Place the coffee beans in the grinding jar.
• Close the lid by turning it clockwise until you hear a
click. The lid is now locked.
• Insert the plug into the mains power socket.
• Switch the coffee grinder on by holding down the
pulse button.
• Release the pulse button when the beans are
sufficiently fine.
• Wait until the blade unit is no longer rotating.
• Remove the plug from the mains power socket.
18
Instruction manual
• Open the lid by turning it anticlockwise.
• Use the ground coffee to make a delicious cup of
fresh coffee.
• Clean the appliance immediately after use.
NOTE
• The coffee grinder can grind up to 50 g of coffee
beans at one time. If an excessive quantity of coffee
beans is placed in the grinding jar, the coffee
grinder may not function correctly and the appliance
may be damaged.
• Safety is of paramount importance. For this reason
the coffee grinder is fitted with a safety locking
system. The coffee grinder only works when the lid is
positioned correctly.
• Do not use the coffee grinder continuously for
longer than 30 seconds at a time. The coffee
grinder must cool down for at least 1 minute after
being used for 30 seconds.
CLEANING AND MAINTENANCE
WARNING:
• Before cleaning the appliance, always switch it off
and unplug it from the electricity supply.
Cleaning
• Do not clean the appliance with an aggressive or
abrasive cleaner or with a sharp object, such as a
hard brush or a knife.
• Exercise care when cleaning the blades; they are
TM-1357