Eu - Compliance Statement - Honeywell Intermec CK70 Mode D'emploi

The camera assembly with flash is classified as: Risk Group 2.
Caution: When using the camera flash, keep the camera flash LED at least 317 mm (12.5 in) away from the subject's eyes. Otherwise
serious damage to one's eyes may occur.
Caution: 802.11a wireless LAN 5150 to 5350 MHz (5.15 to 5.35 GHz) is limited to indoor use only.

EU - Compliance Statement

The CE marking indicates compliance with the following directives:
• 2014/53/EU Radio Equipment
• 2011/65/EU RoHS (Recast)
European contact:
Hand Held Products Europe B.V.
Lagelandseweg 70
6545CG Nijmegen
The Netherlands
The full text of the EU declaration of conformity is available at the following: www.honeywellaidc.com/compliance.
The equipment is intended for use throughout the European Community.
Operating Frequency Ranges:
• 2400 - 2483.5 MHz (PAN Bluetooth): 8.0 dBm EIRP;
• 2400 - 2483.5 MHz (WLAN IEEE 802.11b/g/n): 18.2 dBm EIRP;
• 5150 - 5350 MHz, 5470 - 5725 MHz (WLAN/RLAN IEEE 802.11a/n): 16.8 dBm EIRP;
Model: 1001CP01U:
• 880 - 915 / 925 - 960 MHz (UMTS 900 Band, Tx/Rx), 1920 - 1980 / 2110 - 2170 MHz (UMTS 2100 Band, Tx/Rx): 24 dBm;
• 880 - 915 / 925 - 960 MHz (GSM/EGPRS GSM 900 Band, Tx/Rx): 33 dBm;
• 1710 - 1785 / 1805 - 1880 MHz (GSM/EGPRS DCS 1800 Band, Tx/Rx): 30 dBm;
Models: 1001CP01 and 1001CP01U - 802.11a/b/g/n and Bluetooth
This equipment may be operated in the following countries without restriction:
AT BE BG HR CY
LV LI LT LU
Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 3 Band A: 2400-2483.5 MHz)
AZ No license needed if used indoor and power not exceeding 30 mW.
IT The public use is subject to general authorization by the respective service provider.
SRD with FHSS modulation
Maximum 2.5 mW EIRP.
Maximum 100 mW EIRP. Permitted for use SRD for outdoor applications without restriction on
installation height only for purposes of gathering telemetry information for automated monitoring and
resources accounting systems. Permitted to use SRD for other purposes for outdoor applications
only when the installation height is not exceeding 10 m above the ground surface.
Maximum 100 mW EIRP. Indoor applications.
RU
SRD with DSSS and other than FHSS wideband modulation
Maximum mean EIRP density is 2 mW/MHz. Maximum 100 mW EIRP
Maximum mean EIRP density is 20 mW/MHz. Maximum 100 mW EIRP. It is permitted to use SRD
for outdoor applications only for purposes of gathering telemetry information for automated
monitoring and resources accounting systems or security systems.
Maximum mean EIRP density is 10 mW/MHz. Maximum 100 mW EIRP. Indoor applications.
UA EIRP =100 mW with built-in antenna with amplification factor up to 6 dBi.
Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 13 Band E1: 5150-5350 MHz, Band E2: 5470-5725 MHz))
AZ No license needed if used indoor and power not exceeding 30 mW.
Für Anwender in Deutschland (de)
Die Produktdokumentation ist unter www.honeywellaidc.com verfügbar.
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen lesen soll. Diese
Ergänzung muss zur zukünftigen Bezugnahme aufgehoben werden.
Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec Technologies
Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen vorgenommen werden, die nicht
von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des Produkts verletzt werden und der Benutzer
die Berechtigung zur Verwendung des Geräts verlieren.
CZ DK EE FI FR
MT NL NO PL PT RO SK
DE GR HU IS IE
SI ES SE CH GB
TR
3