Alpride E1 Supercap - Osprey SOELDEN PRO Mode D'emploi

SOELDEN / SOPRIS PRO PACK OVERVIEW
1
SOELDEN PRO
SIZE Men's One Size
TORSO FIT RANGE 17-22"/43-56cm
HIPBELT FIT RANGE 26-50" / 66-127cm
VOLUME 34 L / 2075 cu in.
USABLE VOLUME (w/ Alpride in pack) 32 L / 1953 cu in.
PACK WEIGHT
3.50LB / 1.6KG
ALPRIDE WEIGHT 2.82lb / 1.28kg
TOTAL WEIGHT
6.35LB / 2.88KG
DIMENSION 22 x 13 x 11" / 56 x 32 x 27 cm
FEATURES
+ Alpride E1 Electronic Avalanche Airbag Unit Included
+ Large front panel J-zip access to avalanche safety kit pocket
with shovel handle and probe sleeves
+ Large U-zip access to main compartment
+ GPS/Radio internal carry with mic harness webbing
attachment points
+ A-frame or diagonal ski carry
+ Vertical front panel snowboard carry
+ Easy-access scratch-free accessories/goggles stash pocket
+ Single-zippered hipbelt pocket / single hipbelt gear loop
+ Sled carry attachment loops
+ Dual position (front or top of pack) stow-away helmet carry
+ Secure ice tool carry sleeve and attachment point
FABRIC
Main
Nanofly ® (210D Nylon & UHMWPE)
Bottom 100% UHMWPE Fabrics
(Ultra-high-molecular-weight polyethylene)
OSPREY / ALPRIDE E1 AIRBAG SYSTEM | Owners Manual
SOPRIS PRO
Women's One Size
14-19"/35.5-48cm
24-45"/ 61-114cm
32 L / 1953 cu in.
30 L / 1831 cu in.
3.30LB / 1.50KG
2.82lb / 1.28kg
6.13LB / 2.78KG
21 x 13 x 11 " / 54 x 32 x 27 cm
CARRY
Suspension
+ 2.5mm Lightwire frame threaded into 1.0mm HDPE framesheet
+ 1.5mm HDPE stay
+ Maximum mobility at a lighter weight without sacrificing load
carrying capabilities
Backpanel
+ Thermoformed contoured, die cut EVA foam backpanel for
lightweight, comfortable carry
+ Snow shedding material to reduce ice/snow buildup
Harness
+ Contoured die cut EVA foam for lightweight, stable and
comfortable fit
+ Airbag handle attachment points
+ Adjustable sternum strap with safety whistle
+ Gender-specific shaping for optimal fit
Hipbelt
+ Adjustable 25mm webbing with EVA foam padded stabilizing
hipwings
+ Aluminum safety buckle closure and tuckaway leg loop required
for avalanche terrain
+ Gender-specific shaping for optimal fit

ALPRIDE E1 SUPERCAP

2
SUPERCAPACITORS
The E1 Avalanche Airbag System is the first avalanche airbag that does not use lithium-ion or lithium polymer batteries to fuel the compressor's
electric motor.
The E1 System uses its SuperCapacitors to store energy in the form of an electrostatic field. Unlike traditional batteries, there is no need to
create a chemical reaction to generate energy, allowing the E1 System to release its power faster.
The E1's SuperCapacitors offer several advantages over batteries. They are not sensitive to changes in temperature, delivering the same
performance at -30 degrees C and +50 degrees C. This saves weight because, unlike batteries, there is no need to boost the SuperCapacitors
to guarantee outstanding performance at low temperatures.
While batteries tend to wear out after repeated charges, the SuperCapacitors stay strong. They are guaranteed for 500,000 charging cycles
with a nearly infinite lifespan, superior to the 3- to 5-year lifespan of the average battery. SuperCapacitors are considered passive electronic
elements, like cameras for example, so there are no restrictions on traveling, shipping or storage. This is a major advantage over traditional
batteries and compressed gas cartridge systems.
THE RADIAL COMPRESSOR
The E1 System uses a radial compressor, similar to turbo compressors found in cars. This design allows for high-speed air flow and inflation
pressure equal to compressed air cartridge avalanche airbag systems.
2 x AA BATTERIES
The E1 SuperCap System uses two AA batteries for two primary purposes:
1 to recharge the SuperCapacitors.
2 to guarantee that the SuperCapacitors keep their full power, compensating for their slow loss of charge and ensuring several months of
autonomy (see section below on autonomy).
Note: Only alkaline or lithium (AA batteries) should be used (for quick recharging at very low temperatures). Use brand new, premium quality
Alkaline AA / LR6 batteries.
WARNING Do not use AA zinc carbon batteries and NiCd or NiMH accumulators (rechargeable). These are often not strong enough to
sufficiently charge the SuperCapacitors.
Depending on the AA battery technology, recharge and autonomy can vary:
Alkaline batteries:
+ are capable of 1 recharge OR 3 months autonomy of normal use (1.5 months if constantly on).
+ it is strongly recommended to change the batteries after 1 recharge of the system.
Lithium batteries:
+ are capable of 3 recharges OR 5 months autonomy of normal use (3 months if constantly on).
+ it is strongly recommended to change the batteries after 3 recharges of the system.
MICRO-USB PORT
+ The micro-USB port (5V – 2A) makes it possible to recharge the SuperCapacitors using the USB / micro-USB cable provided.
+ Charging can be completed with a standard USB charger (not included). Recharging the SuperCapacitors with the micro-USB cable takes
priority over recharging via the 2 x AA batteries.
+ The SuperCapacitors can be recharged with the micro-USB cable even in the absence of the AA batteries.
AUTONOMY OF THE E1 SYSTEM
The system's autonomy depends on the quality and energy of the AA batteries and the frequency and duration of use in ON or OFF mode.
The instances listed below assume the use of high-quality alkaline batteries:
+ Approx. 2-3 months of autonomy with two new AA alkaline batteries not including recharge of the SuperCapacitors (new batteries
inserted after recharging the SuperCapacitors)
+ The system can be used without additional AA batteries. However, we strongly suggest to always use it with the batteries to ensure
extended autonomy.
If used without batteries and the LED status is flashing green, the autonomy is a minimum of 6 h.
English | 9