Ruark Audio MR1 Guide De L'utilisateur page 8

6 Playing from a Bluetooth device
To play audio from a Bluetooth device you first need
to pair the device with your MR1 speakers, after that
you simply need to connect it. Pairing is necessary to
prevent unwanted devices connecting to your speakers.
1
Select Bluetooth mode on your MR1s
When you first turn on your speakers they will be
in Line-in mode and the status indicator (9) will be
solid amber. Activate Bluetooth mode by pressing
and holding the control knob (8) for 2 seconds (long
press) or by pressing the Bluetooth button (22) on the
remote control. When the status indicator (9) flashes
blue the speakers are discoverable and ready to pair
or connect to your Bluetooth device.
2
Pair your Bluetooth device
Turn on Bluetooth on your audio device and select
"RUARK MR1" from the device list. When your MR1s
have paired and connected the indicator (9) will turn
solid blue.
3
Start music play on your Bluetooth device
You may need to select "Ruark MR1" or Bluetooth as
your music playing device. On Apple devices you can
do this by tapping the airplay symbol
8
General notes on Bluetooth function
● If you are unsure how to connect your device, please
refer to your device's user manual.
● For some devices you may need to input "0000" as
the pairing password.
● It may take a few seconds for your MR1 speakers to
appear in your device list.
● Pairing will time out after 10 minutes and your MR1
speakers will go into standby.
Operating range
Your MR1 speakers will typically operate up to 10
metres (30 feet) from your Bluetooth device although
obstructions such as walls will reduce this. Operating
distance will also depend on the Bluetooth performance
of the device you connect.
Disconnecting a device
Short press the Bluetooth button (22) on the remote
control. When the status indicator (9) flashes the current
device is disconnected and your MR1s are ready to pair
or connect again.
Pairing additional devices to your MR1s
You can pair up to 8 devices although you will only be
able to play audio from one device at a time.