Replacing The Battery - Tivoli Audio radio silenz Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
7. To stop noise cancellation, push the switch on the controller to the off position (the green power
light will turn off), or to temporarily defeat the noise cancellation, press and hold the Defeat button
on the controller. This may be helpful to hear an announcement or hear a person speaking without
having to remove the headphones, or having to switch off the noise cancellation.
AN IMPORTANT NOTE ABOUT THE WOOD HOUSINGS
The variation in color and grain are characteristics of real wood and contribute to its natural
beauty. Each solid wood housing is unique. As a result, the finish of one may not precisely
match the other, or the wood used on other Tivoli Audio products.
Depending on the wood type, you might also notice the wood darken over time with exposure
to light. This is normal.
Do not block or cover-up the microphone grilles in the wood housings.
CLEANING
Never use liquids as they can damage the electronics inside the headphones. Use only a soft, dry
cloth as necessary.

REPLACING THE BATTERY

When the battery is very low, the noise cancellation will be less effective and the green power LED
will flash. To reduce the risk of fire or personal injury, replace the battery with an equivalent, brand
name AAA battery. Dispose of spent batteries according to your state's/country's regulations.
5 – ENGLISH

Publicité

Table des Matières
loading

Table des Matières