Group Selection; Id Selection; Audio Output High / Low - Albrecht Multicom Guide D'utilisation

to blink. Switching to the next menu option is done by pressing the menu button
repeatedly. In order to change a setting the selected value can by changed by
pressing „▲" or „▼". To confi rm the settings wait for about 3 seconds for the device to
leave the menu and save the settings or press the menu button for about 2 seconds.

3.1.1. Group selection

Group numbers from 0-39 are available.
Every radio from a communication group needs to have the same group number.

3.1.2. ID selection

In a group, every radio needs to have each different ID per radio from „00" to „99".
The ID „00" becomes a master radio in a group and every group needs to have a
master radio with ID „00" per group without alternative. „MASTER" and „TALK" are
displayed on the LCD as soon as the ID „00" is set.

3.1.3. Audio Output High / Low

The audio output setting is changing all volume levels of the unit to a higher
respectively lower level. The options UL and UH are available.
When you are listening to the radio in very loud environments you can increase the
volume by selecting UH. UL is the default setting.
English 17