Carton Inventory - LiftMaster ATSW Mode D'emploi

Preparation

Carton Inventory

Accessories will vary depending on the door operator model purchased. Depending on your specific model, other
accessories may be included with your door operator. The instructions for these accessories will be attached to the
accessory and are not included in this manual. The images throughout this manual are for reference and your
product may look different.
A. Header bracket
B. Pulley and bracket
C. Door bracket
D. Curved door arm
E. Straight door arm
F. Trolley (provided separately from the carton)
G. Emergency release rope and handle
H. Rail (provided separately from the carton)
I. Door operator
J. Chain spreader
K. Chassis support bracket
L. Chain (provided separately from the carton)
M. Door control
N. White and red/white wire
®
O. The Protector System
Safety reversing sensors with 2-conductor white and white/black bell wire attached: sending sensor (1),
receiving sensor (1), safety sensor brackets (4), and "C" wraps (2)
P. Safety labels and literature
Q. Rail grease
®
Security+ 2.0 Accessories
883LMW
Push Button Door Control
Chassis Support Bracket Hardware
Screw #8-32 x 3/8" (2)
Hex Bolts 1/4"-20 x 5/8" (2)
Lock Washers (2)
Washered Bolt 5/16"-18 x 1/2" (2)
Installation
Hex Bolt 5/16"-18 x 7/8" (4)
Lag Screw 5/16"-9 x 1-5/8" (2)
Lag Screw 5/16"-18 x 1-5/8" (2)
Clevis Pin 5/16" x 2-3/4" (1)
Clevis Pin 5/16" x 1-1/4" (1)
Clevis Pin 5/16" x 1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16"-16 (4)
Door Control Hardware
Screw 6AB x 1" (2)
Screw 6-32 x 1" (2)
A
B
F
C
G
D
E
O
6
Chain Spreader Hardware
Screw #8-32 x 3/8" (2)
Rail Hardware
Washered Bolts and Lock Washer (mounted in the top of
the door operator)
Self-Threading Screw 1/4"-14 x 5/8" (2)
Ring Fastener (3)
Carriage Bolt 1/4"-20 x 1/2" (2)
Wing Nut 1/4"-20 (2)
Hex Bolt 1/4"-20 x 5/8" (2)
Lock Nut 1/4"-20 (2)
Lag Screw 1/4" x 1-1/2" (4)
Drywall Anchors (2)
L
H
M
K
N
J
Not
Provided
P
I
Q
Not
Provided