CAME MS-N1009-UT Mode D'emploi page 30

INSTALLATION NOTES
Before using the network video recorder, take note of the following:
• Keep liquids away from the video recorder.
• Place the video recorder in a well-ventilated area.
• Make sure that the humidity and temperature values in the room are within the limits
allowed by the video recorder.
• Humidity and an accumulation of dust on the video recorder's control board may cause a
short circuit. Dust the control board, connector, casing and fan regularly with a suitable
brush.
• Replacing the battery incorrectly may lead to a risk of explosion. The battery should never
be replaced by users and the replacement battery must be the same or of an equivalent
type.
☞
The appliances covered in this manual are MS-N1000 video recorders.
Main product features
Basic information
• The range of Milesight video recorders - including the MS-N1000 series - can be
connected to all IP cameras that support the ONVIF protocol.
Monitoring
• HDMI video output, separate real-time display and playback features.
• Compatibility with HDMI UHD display with a maximum resolution of 3840x2160 (UT series
NVRs only).
• 1/4/8/9/16 real-time display images, with adjustable channel sequence.
• Quick menu for viewing in real time.
• Real-time group sequencing, manual recall and automatic sequencing with adjustable
interval.
• Motion detection and video signal loss warning.
• Support for various PTZ protocols, PTZ presets and automatic sequences.
• Enlarging of the central area of the image using the mouse on any area.
• Privacy mask.
• OSD title and date configuration.
HDD management
• S.M.A.R.T. technology support.