Identification; Product Description And Type Designation; Product Marking; Preparing The Product For Use - Honeywell equIP HCPB302 Manuel D'instructions

4 Identification

4.1 Product description and type
designation
Honeywell's latest Corrosion Protected Fixed
Network Camera is suitable for industrial and marine
applications. HCPB fixed cameras provide extremely
crisp video with up to 2 million effective pixels, 30x
optical zoom and True Day/Night WDR for continuous
surveillance in safe area applications.
Flexible Surveillance Solution
AISI 316L stainless steel construction
3 x PG13.5 cable glands nickel-plated brass for
external connections
IP66/IP68 ratings guarantee the complete protection
against harsh weather
Operating temperature:
cold start: -20⁰C (-4°F) ~ +60⁰C (+140°F)
running: -40⁰C (-40°F) ~ +60⁰C (+140°F)
1080P 60fps and 30x optical zoom lens for the
flexibility to clearly view the target area with desired
depth
H.265, H.264 and MJPEG codec, triple stream support
ONVIF Profile S compliant
Built-in Analytics in the camera, such as face
detection and intrusion tracing
Security features include individual signed certificates
and data encryption

4.2 Product marking

See the label attached to the product.
4
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.

5.1 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Camera
• Housing equipment:
• Allen wrench
• Bolts and screws
• Sunshield
• CD-ROM with installation software
• Instruction manual
5.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
Document 800-23093 Rev. A