Cleaning And Maintaining; Cleaning The Dustbin - Samsung POWERbot SR20H9050U Série Mode D'emploi

Cleaning and maintaining

you must turn off the emergency switch before cleaning poWerbot.

Cleaning the dustbin

Clean the dustbin when filter inspection indicator (
1
Remove the dustbin
4
Detach the cyclone unit
from the dustbin cover
then wash the dustbin
and the filter
Cleaning the sensors and the camera
Lightly wipe with soft cloth.
) turns on or if there's too much dust in the dustbin.
2
Remove the dustbin
cover
5
Reassemble the
dustbin
Camera
Front sensor
window
ENGLISH-20
3
Remove dust in the
dustbin and cyclone
unit
6
Reinsert the dustbin
into the main body until
it clicks
Cliff sensors
"click"
Rear sensor
window