General Instructions; Safety Instructions - Kerbl EcoKill 299950 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
Operating and Safety Instructions
EN
for Electric Fly Killers EcoKill

1. General instructions

The present operating and safety instructions are for the user. Please read the instructions carefully and thoroughly and take heed
of the regulations before putting the device into operation!

2. Safety instructions

2.1. Use
In the event of improper use of and tampering with the device, the warranty and liability of the manufacturer will be rendered null
and void. The voltage given on the name plate must correspond to the voltage of the power source.
2.2. Check all components before each implementation.
Damaged parts are only to be repaired by a specialist or by the manufacturer. Repairs done improperly can result in accidents for
the operator. Use only original parts for any eventual repairs.
2.3. Safety
Before cleaning, rearranging or servicing the device always first pull the plug from the power source!
2.4. Keep unauthorized persons away.
Make sure that unauthorized persons, children in particular, do not have access to the fly killer.
2.5. Fire hazard!
Do not operate the electric fly killer in barns or similar places and do not set the device up in the vicinity of
combustible materials and in places where the presence of combustible vapors, explosive dust or ignitable
fluids is likely.
2.6. Guard the connection lines
Do not use the connection line to pull the plug from the power source or to carry the device. Take precautions that the connection
lines are not exposed to heat, oil or sharp edges. Damaged connection lines can cause fires, short-circuiting and electric shocks. In
the event that the connection line of this device gets damaged, it must be replaced by a special connection line available from the
manufacturer or from customer service.
2.7. Take the ambient influences into account.
Guard your device against all liquids and moisture. Never submerge in water or clean with a water jet. Otherwise there will be a
danger of fire or electric shock.
2.8. Regular servicing.
Always store your device securely, out of reach of children, and dry. Heed all possible maintenance regulations. Check the device at
regular intervals. Use only original spare parts and accessories.
2.9. National and international regulations
National and international safety, health and labor regulations are to be heeded.
3. Operating instructions
3.1. Function
By means of ultraviolet light, flying insects are lured into the effective range of the device. Attached in front of the light tube is a
screen charged with high voltage. Upon contact with this high-tension screen the insects are quickly and hygienically killed. The
fallen insects are collected in a drip pan which only has to be removed from the housing for emptying.
3.2. Unpacking
Open the packing carefully and remove all the parts. Avoid scratching the device on sharp or pointed objects. Make sure that none
of the parts, in particular the chain and the drip pan, is left in the packing.
Keep the operating instructions in a safe place!
3.3. Assembly/erection
The device can be
- put in place or
- suspended on the chain which is included.
Relevant for both variants: Make sure the device is not placed too close to sources of ignition, i.e. easily combustible objects.
The device is not made for outdoor use!
6
Hochspannung

Publicité

Table des Matières
loading

Table des Matières