Thermador PRO GRAND PRD364JDGC Manuel D'utilisation page 6

Masquer les pouces Voir aussi pour PRO GRAND PRD364JDGC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Before using the range, ensure that it is equipped with a
proper backguard. Refer to the
accompanying this appliance for more information.
WARNING
This appliance should not be installed with a ventilation
system that directs air in a downward direction toward
the range. This type of ventilation system may cause
ignition and combustion problems with the appliance
resulting in personal injury, property damage, or
unintended operation. Ventilating systems that direct the
air upwards do not have any restriction.
WARNING
To avoid possible burn or fire hazard, a back guard
designed specifically for this range must be installed
whenever the range is used.
WARNING
ALWAYS DISCONNECT THE ELECTRICAL PLUG
FROM THE WALL RECEPTACLE BEFORE
SERVICING THIS UNIT.
CAUTION
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE CONNECTED TO A PROPERLY GROUNDED AND
POLARIZED ELECTRICAL POWER SUPPLY.
36" Dual-Fuel Models:
240/208 volts, 60 Hz., 40 Amp dedicated electrical circuit
required.
48" Dual-Fuel Models:
240/208 volts, 60 Hz., 50 Amp dedicated electrical circuit
required
It is recommended that a dedicated circuit servicing this
appliance be provided. See the
electrical requirements and grounding instructions.
The use of gas cooking appliances results in the production
of heat and moisture.
Important Safety Instructions
It is the personal responsibility and obligation of you, the
user, to have this appliance connected to the electrical
power supply by a qualified electrician, in accordance with
the National Electrical Code and/or applicable local codes
and ordinances.
WARNING
IN CASE OF AN ELECTRICAL FAILURE
If for any reason a gas control knob is turned ON and
there is no electrical power to operate the electronic
igniters on the range's cooktop STAR
OFF the gas control knob and wait 5 minutes for the
gas to dissipate before lighting the STAR burner
manually.
To light the STAR burners manually, carefully hold a
lighted match to the STAR burner ports and turn the gas
control knob to HI
During a power failure, you can use the standard
cooktop STAR burners, but each must be lit with a
match.
DO NOT attempt to light the XLO
manually. These STAR burners are equipped with the
®
ExtraLow
feature and cannot be lit manually.
TESTED IN ACCORDANCE WITH:
ANSI Z21.1, Household Cooking Appliances
CAN 1-1.1-M81, Domestic Gas Ranges
UL 858, Household Electric Ranges
CSA C22.2 No. 61, Household Cooking Ranges
Check your local building codes for the proper method of
installation. In the absence of local codes, this unit should
be installed in accordance with the National Fuel Gas Code
No. Z223.1 current issue and the National Electrical Code
ANSI/NFPA No. 70 current issue or the Can - B149
Installation Codes for Gas Burning Appliances and C22.1
Canadian Electrical Code Part 1.
for
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
®
burners, turn
.
®
STAR burners
English 3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pro grand prd364jdguPro grand prd366jgcPro grand prd366jguPro grand prd486jdgcPro grand prd486jdguPro grand prd48jdsgc ... Afficher tout

Table des Matières