Before You Begin; Getting Started; Oven Racks - Thermador PRO GRAND PRD364JDGC Manuel D'utilisation

Before You Begin

Getting Started

IMPORTANT
All oven knobs and selectors must be set to OFF
before powering up the range.
To prevent unintended operation at power up, please set
all oven knobs to OFF. To ensure customer safety in the
event of power failure, the unit will display an error
message upon reinstatement of power unless all oven
knobs are set to OFF. Set all oven knobs to OFF and
reset the breaker to clear the message.

Oven Racks

CAUTION
To help prevent burns, never remove or reposition the
oven racks while the oven is ON or while the oven is
cooling.
WARNING
Aluminum foil should NEVER be used to cover the oven
racks or to line the oven. It can damage the oven and
cause a fire hazard if heat is trapped under it.
Oven Rack Positions
The correct rack position depends on the recipe and the
cooking mode. The rack positions are numbered from
the bottom of the oven, like an elevator. Rack position 3
is the most frequently used position. Place rack(s) in the
proper position before turning on the oven.
5
4
3
2
1
Before You Begin
Figure 4: Oven Rack Positions
®
Placing Full Access Racks in the Oven
1. Hold the rack on a slight angle. Place the safety hooks
under the front of the rack guides.
2. Push the rack into the oven, lifting the rack stops over
the front of the rack guides.
3. Hold the rack straight.
4. Push the rack in until it is even with the front hooks.
5. Lift the rack up.
6. Push the rack in completely.
7. Engage the rack's front hooks on the rack guides.
IMPORTANT: When placing the gliding rack in the oven,
make sure the front supports on the rack guides rest in the
large slots at the front corners of the rack. This is
necessary to keep the rack in the correct position while
fully inserted into the oven.
Figure 5: Inserting the Gliding Oven Rack
English 11