Tbf - Tanita TBF-300A Mode D'emploi

a

TBF-310

a Connecting the Weighing Platform to the Control Box
1. Connect the circular shaped plug of the connection cable to the jack located on the back of the control box. The
plug should be facing up when inserted.
2. Connect the rectangular plug of the connection cable to the jack located on weighing platform.
3. Connect the plug of AC adapter to the DC jack located on the back of the control box.
4. Insert the power cord to the AC adapter, and plug it into a power outlet.
WARNING
• In order to reduce the risk of electric shock, never insert or remove the power cord
with wet hands.
CAUTION
• Use only the Tanita AC adapter provided with the unit.
• Put the weighing platform on a flat, level surface.
14
a TBF-410
a Leveling the Weighing Platform
• For optimum accuracy, place the unit on a flat and level surface.
• Check the level gauge to make sure the air bubble is in the center of the red circle.
• The weighing platform has adjustable feet to ensure a level and stable weighing surface. If the air bubble is not in the
center of the red circle, it can be centered by turning the feet.
a Plugging in the Unit
1. Connect the plug of AC adapter to the DC jack located on the back of the weighing platform.
2. Insert the power cord to the AC adapter, and plug it into a power outlet.
on the
WARNING
CAUTION
Adjustable feet
Red Circle
Level Gauge
• In order to reduce the risk of electric shock, never insert or remove the power cord
with wet hands.
• Use only the Tanita AC adapter provided with the unit.
• Put the weighing platform on a flat, level surface.
DC Jack for AC Adapter
15