Switching The Alarm On / Off - Auriol HG00160A/E Instructions D'utilisation Et Consignes De Sécurité

� Switching the alarm on / off
Switch the alarm on by pressing and keeping
pressed the START button 2 and the RESET
button 4 while in time mode. If the alarm is
switched on, the alarm symbol 7 appears in
the display.
When the alarm sounds, you can activate
the Snooze function by pressing the START
button 2 . The alarm sounds again after 4 to
5 minutes. The alarm will keep on sounding as
many times as you press the START button 2 .
Press the RESET button 4 to stop the alarm.
The alarm will keep on sounding for approx. 1
minute if you don't press any button.
Press the RESET button 4 when the watch is in
time mode to display the alarm time.
If the watch is in time mode, press and keep
pressed the RESET button 4 . Press the START
button 2 to switch off the alarm. The alarm
symbol 7 disappears.
� Activating / deactivating
the acoustic signal
Note: An acoustic signal will sound every hour on
the hour.
Press the MODE button 6 repeatedly until the
time field 3 appears in the display.
Press and keep pressed the RESET button 4
and while doing this, press the MODE button
6 . All the day of the week fields 1 appear.
The audible signal function is activated.
GB/IE 11